Sealer Residue Remover

Yes, this product is a non-acidic cleaner so safe to use on acid sensitive surfaces like limestone and marble.

No, you should not need to unless its a water-based top coat sealer.

If you have pre-cleaned with this product (before sealing) rinse heavily after use and allow the surface to fully dry. At least 24 hours drying time & possibly more on porous natural stone when air temperatiures are low.

Yes, it is safe to use on sandstones, slate, porcelains and other natural stone such as granite.

It will remove very light contaminations of grout & cement hazing. It will not remove thicker contaminations or layers of cement or grout haze.

If you wish to remove obvious cement based grouts etc use Floorseal Cement & Grout Haze Remover but only use this product on acid resistant surfaces.

It is for the removal of the invisible resinous slick around the joint. It is this non-porous contamination/coating which should be removed before sealing the surface.

This product does not remove heavy obvious concentrations of compound. It is for this reason it is safe to use on and around the actual joint.

If you wish to remove jointing compounds please use Floorseal Jointing Compound Residue Remover.

No, it is a non-acidic solution.

If it is a normal matt finish impregnator or water-based colour enhancer Floorseal Sealer Residue Remover should remove it. You may need to use the product neat with a long dwell time – depending on the build up of the impregnator.

General dirt, grime, oils and waxes. It will also attack residue left by excess impregnators or very slight brush in compound residues.

It will not remove obvious mistakes with brush in compounds – where there is a clear visible contamination on the surface. You would need to use Floorseal Jointing Compound Residue Remover to do this.