Intensive Tile Cleaner

• Please read the Technical Data Sheet for full instructions.
• Always carry out a test patch to assess the products suitability and dwell time. Do this in an inconspicuous area.
• If the product is not suitable do not continue to use.
• Dilute 1:5 with warm water – adjust this concentration up to neat as required.
• Apply the product and leave to dwell for around 10-15 minutes.
• Agitate the solution with a mop.
• Rinse the area with clean water.
• This product could effect paints, plastics and varnishes, particularly when used in stronger solutions. Mask off or wipe down any surfaces if they come into contact with the product.
• Safe for children & pets once dry.
• You may wish to re-seal some surfaces after deep cleaning with this product.

Highly effective cleaner for grimy floor and wall tiles

Intensive Tile Cleaner is highly effective at cleaning really dirty heavily marked tiles & grout where other general household cleaning products have failed. Floorseal Intensive Tile Cleaner is suitable for use on ceramic tiles, porcelain tiles and clay based tiles like terracotta and quarry tile. It can also be used on any natural stone such as sandstones, slates, limestone and travertine. This tile cleaner has a special blend of cleaning agents which dissolve ingrained grime, waxes and oils. It is a highly effective deep cleaning solution for use on modern textured non-porous tiles which become ingrained with dirt. This includes anti-slip porcelain tiles and quarry tiles. If you have a pet which causes a rapid build up of grime on textured anti-slip tiles this product is the answer!

A non acid cleaner that will not harm sensitive stone

Intensive Tile Cleaner by Floorseal is a non acidic cleaning solution, so safe to use on acid sensitive materials like limestone or cement based tiles. It will effortlessly remove dirt, grime, oil and waxes. This intensive tile and grout cleaner is effective on very dirty grout lines and the surface of the tile. Intensive Tile Cleaner can be applied with a mop, sponge or a brush. This deep cleaning product works at its optimum when left to dwell for around 10 – 15 minutes. For best results agitate the cleaning solution with a brush or mop after application. Remove the cleaning solution by rinsing with clean water and then allow the surface to dry. Available in 1 litre & 5 litre containers with free economy shipping and express delivery shipping options. Please read the full instructions & related information contained within the Technical Data Sheet. If you require help choosing a sealer or cleaning product please feel free to contact us on (01484) 861461. You can email us at info@floorseal.co.uk.  

1 litre of product covers around 10m2.

Adjust the dilution rate to suit the level of contamination encountered. This can be from as little as 1:5 to being applied neat.

Please note – Glazed and non-porous surfaces will acheive greater coverage rates than the 10m2 per litre stated.