• Please read the Technical Data Sheet for full instructions.
• Carry out a test in an inconspicuous area.
• If you find this product is not suitable for use on your project do not continue to use.
• All surfaces must be completely dry, do not apply if rain is imminent.
• For use on existing tiles apply in a single thin coat to both the tile and grout lines.
• Apply with a microfibre flat mop, cloth or stiff sponge.
• This sealer should be distributed evenly as a thin micro-coating.
• We recommend working in small areas of approximately 10m2.
• Do not walk in your work area until the sealer is dry.
• *For use as a pre-grout sealer apply to the tiles 1 hour prior to grouting.
•  *Grout and clean the haze as normal.
• *Apply again 24 hours later, once the tile and grouting are clean & dry.
•  Do not allow this product to pool or puddle, always apply in a thin even coat.
• The product dries in approximately 1 hour and cures in 24 hours.
• Can be used in wet areas i.e. bathrooms, wet rooms and pool surrounds.
• This product should only be applied when air temperatures are above 10ºC and below 20ºC.

100% breathable matt finish porcelain sealer

Porcelain Tile Eco Seal is a matt finish water-based impregnating & breathable tile sealer. This porcelain sealer can be used on internal and external porcelain tiles. It leaves a natural matt finish, so does not alter the appearance of your tiles. Porcelain Tile Eco Sealer is a high-performance impregnating sealer, providing protection from water-borne and oil-based staining. The application of Floorseal Porcelain Tile Eco Seal will make general maintenance easier. This product inhibits staining, efflorescence, moss, algae, black spot lichens and other organic growth. Porcelain Tile Eco Seal can be applied prior to grouting as a pre-grout sealer. This reduces the likelihood of grout hazing associated with cement-based & resin-based grouting systems. It can also be applied to existing interior or exterior porcelain tiled floors & walls, sealing the tile & associated grout lines.

Simple application with a huge coverage rate

Porcelain Tile Eco Seal is easy to apply with a microfibre mop or pad. Apply a thin coat over the whole of the tiled surface and allow to dry. This can be completed prior to grouting as a pre-grout sealer. Or apply to existing surfaces after installation – this can be to new or older tiled floors. When applied as a pre-grout sealer, apply to the tiles, allow the product to dry and grout as normal after at least one hour has elapsed. Do not walk on the tiles for one hour after the sealer has been applied. After the grout has been applied wait approximately 24 hours to allow the grout to dry & cure. Once any final clean-up has taken place apply again over the whole surface as before. To seal existing tiled floors, apply one thin coat over the tile and the grout lines. Allow to dry for one hour before walking on the floor. This product can be applied every one-two years. As the sealer is not a surface coating it will not blister, peel or crack. The surface can be deep cleaned and new sealer applied as and when required. Available in 1 litre, 2 litre & 5 litre containers with free standard delivery & express shipping options. Samples are available. To view all of our products for cleaning & sealing porcelain & view our handy ‘how to’ guides please Click Here Please read the full instructions & related information contained within the Technical Data Sheet. If you require help choosing a sealer or cleaning product contact us at info@floorseal.co.uk

Approximately 30m2 per litre on most porcelains. The coverage rate can increase to up 50m2 on some smoother porcelains.