Free Express Delivery to UK MAINLAND
Free Express Delivery to UK MAINLAND
£74.99
The 3.2m Telescopic Sprayer Lance is designed to increase spraying reach when applying cleaning products and compatible water-based treatments to high or difficult-to-access exterior surfaces.
The lance extends to approximately 3.2 metres, allowing the user to treat elevated areas while keeping the main sprayer at ground level.
Its lightweight fibreglass construction helps provide greater control and precision during application. The lance folds down in sections, making it easier to carry, transport and store when it is not in use.
The telescopic lance can be used with the following sprayers in the Floorseal range:
1 in stock
The 3.2m Telescopic Sprayer Lance is designed to increase spraying reach when applying cleaning products and compatible water-based treatments to high or difficult-to-access exterior surfaces.
It is particularly useful for treating:
The lance extends to approximately 3.2 metres, allowing the user to treat elevated areas while keeping the main sprayer at ground level.
Its lightweight fibreglass construction helps provide greater control and precision during application. The lance folds down in sections, making it easier to carry, transport and store when it is not in use.
The telescopic lance can be used with the following sprayers in the Floorseal range:
Always read the instructions supplied with the lance, the sprayer and the product being applied before starting work.
Before assembly, inspect the lance, adapter, seals and connections.
Test the complete sprayer and lance assembly with clean water before adding a cleaning product.
Make sure the sprayer is empty and fully depressurised.
Remove the standard lance or nozzle assembly from the sprayer.
Fit the supplied adapter where required, then attach the telescopic lance securely to the sprayer hose or trigger assembly.
Check that all threaded connections are correctly aligned and hand-tightened.
Do not overtighten the connections, as this may damage the threads or seals.
Extend the lance one section at a time.
Make sure each section is securely locked before continuing.
Only extend the lance as far as required for the application. Keeping unnecessary sections retracted will make it easier to control.
Allow sufficient space around you before extending the lance, particularly when working close to buildings, vehicles, trees or overhead obstructions.
Read the product label and Technical Data Sheet in full.
Wear personal protective equipment as recommended.
Never mix different cleaning products inside the sprayer.
Fill and pressurise the sprayer according to its individual operating instructions.
Do not exceed the sprayer’s stated usable working capacity or maximum operating pressure.
Before raising the lance, test the assembly at a low level to ensure:
Hold the lance firmly with both hands where possible.
Raise it gradually and position the nozzle at a suitable distance from the treatment area.
Apply the product methodically, working in manageable sections and following its application instructions.
For render and exterior walls, work across the surface in a consistent pattern to help achieve even coverage.
When applying roof treatments, direct the spray carefully and avoid excessive run-off into gutters, neighbouring properties, planted areas or watercourses.
The sprayer may need to be pumped periodically to maintain consistent pressure.
Release the trigger before lowering or repositioning the lance.
Lower it slowly and maintain control of the extended sections.
Once the application is complete, fully release the pressure from the sprayer before disconnecting the lance.
Flush the telescopic lance immediately after use.
Empty and rinse the sprayer according to the product instructions, then part-fill it with clean water.
Pressurise the sprayer and pump clean water through the hose, trigger, telescopic lance and nozzle.
Continue spraying until the water runs clear and no product residue remains.
Repeat where necessary.
Do not allow cleaning products to dry inside the lance, nozzle, adapter or connecting components.
N/A
| UK Mainland | FREE Express Order by 1pm Mon-Fri |
| Northern Ireland & Offshore Islands | Not available |
Do you offer Next Day Delivery?
Unfortunately we don’t offer a guaranteed next day service, however the majority of FREE Express packages to England, Wales & Scotland are delivered next working day, when ordered before 1pm Monday-Friday. Excludes remote locations including Cornwall and Highlands (allow 2-5 days).
When will my order be sent out?
Orders placed before 1pm (Mon-Fri) are despatched same day. Orders placed on weekends are processed the next working day.
Please visit our Delivery Page for further information
N/A
Please email us with your product order number for SDS information.
For the latest guides and information on best user practices, click here.
